Luxeon AV-X2Plus Uživatelský manuál stáhnout pdf (Strana 29)

LCD Projector User Guide

2626

Problem

The S-Video image source

does not appear.

Only the start-up screen

appears and not the image

from the image source.

The image source is

connected but a No Signal

message appears.

Cause and Solution

Some inexpensive cables are not compatible

with the projector. Be sure to use the cable that

came with your projector.

• Verify that the cables are connected correctly.

See “Connecting the Projector” on page 7.

• Verify that the proper image source is con-

nected and that it is selected on the Setup tab

of the menus.

• Make sure that the image source is turned on.

• Turn off everything and power up again in the

proper order.

• Make sure that your laptop’s external video port

is turned on. See the computer manual for

details.

• Verify that the cables are connected correctly.

See “Connecting the Projector” on page 7.

• Verify that the proper image source is con-

nected and that it is selected on the Setup tab

of the menus.

• Make sure there are no bent pins in the

connectors.

• Make sure the image source is turned on.

• Turn off everything and power up again in the

proper order. See “Starting the Presentation” on

page 8.

• Make sure that your laptop’s external video port

is turned on. See the computer manual for

details.

Image Source

1 2 ... 24 25 26 27 28 29 30 31 32

Žádné komentáře

Luxeon AV-X2Plus Uživatelský manuál Strana 29